Adaption for TriCore Debugger

Debugger Connector for TriCore OCDS-L1 Debugger via JTAG or DAP

Connector 16 pin

Signal	Pin		Pin	Signal
TMS	1		2	VCCS
TDO	3		4	GND
CPUCLOCK	5		6	GND
TDI	7		8	RESET-
TRST-	9		10	BRKOUT-
TCLK	11		12	GND
BRKIN-	13		14	OCDSE-
N/C	15		16	GND

Connector 10 pin

Signal	Pin		Pin	Signal
VREF	1		2	DAP1
GND	3		4	DAP0
GND	5		6	DAP2 OR USER0
GND OR KEY	7		8	DAPEN- OR USER1
GND	9		10	RESET- (PORST-)

Target Connector for TriCore OCDS-L1 Debugger via JTAG or DAP

Dimension

Connector Type

• This is a standard 16 pin double row (two rows of 8 pins) connector (pin to pin spacing: 2.54mm/0.100").
• If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 25.5mm/1".

Additional Information

• This connector is also used for transferring OCDS-L3 on-chip trace data.
• Please see Application Note OCDS Debug Cable for more information.

Half-Size Adapters

Half-Size Adapters for Debuggers

100 mil to 50 mil Adapters Small Footprint for Target Connector