|
Debug and Trace Adaption for RX |
 Target Connector for Debugger Adaption for RX
Target Connector 14 pin
Connector Type
- This is a standard 14 pin double row (two rows of 7 pins) connector (pin to pin spacing: 2.54mm/0.100").
- If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 23mm/0.9".
Pinout
|
Signal
| Pin
| | Pin
| Signal
|
|---|
| | |  | | |
| TCK | 1 |  | 2 | GND |
| TRST- | 3 | | 4 | (EMLE) |
| TDO | 5 | | 6 | (MDE) |
| (MD1) | 7 | | 8 | VCC |
| TMS | 9 | | 10 | (MD0) |
| TDI | 11 | | 12 | GND |
| RESET- | 13 | | 14 | GND |
| | |  | | |
|
Target Connector for Debugger Adaption on MICTOR for RX
Target Connector MICTOR 38 pin (requires Converter LA-3789)
 Picture LA-3789
Target Connector Type
Pinout
|
Signal
| Pin
| | Pin
| Signal
|
|---|
| | |  | | |
| (MDE) | 1 |  | 2 | (MD0) |
| (EMLE) | 3 | | 4 | N/C |
| N/C | 5 | | 6 | N/C |
| N/C | 7 | | 8 | (MD1) |
| RESET- | 9 | | 10 | N/C |
| TDO | 11 | | 12 | N/C |
| N/C | 13 | | 14 | VCC |
| TCK | 15 | | 16 | N/C |
| TMS | 17 | | 18 | N/C |
| TDI | 19 | | 20 | N/C |
| TRST- | 21 | | 22 | N/C |
| N/C | 23 | | 24 | N/C |
| N/C | 25 | | 26 | N/C |
| N/C | 27 | | 28 | N/C |
| N/C | 29 | | 30 | N/C |
| N/C | 31 | | 32 | N/C |
| N/C | 33 | | 34 | N/C |
| N/C | 35 | | 36 | N/C |
| N/C | 37 | | 38 | N/C |
| | |  | | |
| Connect Pin 39,40,41,42 and 43 to GND |
|
Target Connector for Debugger and Trace Adaption on MICTOR for RX
Target Connector MICTOR 38 pin (requires Converter LA-3792)
Picture LA-3792
Target Connector Type
Pinout
|
Signal
| Pin
| | Pin
| Signal
|
|---|
| | | | | |
| (MDE) | 1 | | 2 | (MD0) |
| (EMLE) | 3 | | 4 | N/C |
| N/C | 5 | | 6 | AUDCK |
| N/C | 7 | | 8 | (MD1) |
| RESET- | 9 | | 10 | N/C |
| TDO | 11 | | 12 | N/C |
| N/C | 13 | | 14 | VCC |
| TCK | 15 | | 16 | N/C |
| TMS | 17 | | 18 | N/C |
| TDI | 19 | | 20 | N/C |
| TRST- | 21 | | 22 | N/C |
| N/C | 23 | | 24 | AUDATA3 |
| N/C | 25 | | 26 | AUDATA2 |
| N/C | 27 | | 28 | AUDATA1 |
| N/C | 29 | | 30 | AUDATA0 |
| N/C | 31 | | 32 | AUDSYNC- |
| N/C | 33 | | 34 | N/C |
| N/C | 35 | | 36 | N/C |
| N/C | 37 | | 38 | N/C |
| | | | | |
| Connect Pin 39,40,41,42 and 43 to GND |
|
|
Half-Size Adapters |
- 100 mil to 50 mil Adapters
- Small Footprint for Target Connector
|
|
Debug and Trace Adaption for RX
