BDM Debug-Interface Connector for MPC500/800
The embedded tools company
Debugger Connector
Target Connector for Debugger Adaption for MPC500/800
Half-Size Adapters
home > Products  > JTAG Debugger  > •  > •  > •  > MPC5xx/8xx 




Support
Technical Support
TOP

Debugger Connector

Connectors for MPC500/800

Connector 10 pin


Signal

Pin

 Pin

Signal

    
VFLS0\FREEZE12SRESET-\RESETIN-
GND34DSCK
GND56VFLS1\FREEZE
RESETOUT-\HRESET-78DSDI
VDD910DSDO
    

The two signal names on pin 2 and 7 have the same physical meaning. Only the use of the names differs between MPC500 and MPC800.
TOP

Target Connector for Debugger Adaption for MPC500/800

Dimension

Connector Type

  • This is a standard 10 pin double row (two rows of five pins) connector (pin to pin spacing: 2.54mm/0.100").
  • If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 18mm/0.710".
TOP

Half-Size Adapters

Half-Size Adapters for Debuggers



  • 100 mil to 50 mil Adapters
  • Small Footprint for Target Connector






Copyright © 2012 Lauterbach GmbH, Altlaufstr.40, D-85635 Höhenkirchen-Siegertsbrunn, Germany  Impressum
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice.
Last generated/modified: 16-Feb-2012